Nickel Alloy Welding WireTig Wire ERNiCrMo-4  

Standards

EN ISO 18274 - Ni 6276 - NiCr15Mo16Fe6W4

AWS A5.14 - ER NiCrMo-4

  Features and Applications ER-NiCrMo-4 is used for the welding of alloys that have similar chemical compositions, this includes dissimilar materials of nickel-base alloys, steels and stainless steels. Due to the high molybdenum content, this alloy offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Typically used on pipelines, pressure vessels, chemical processing plants, offshore oil platforms, gas facilities, power generation and marine environments etc. Typical Base Materials N10276, W.Nr: 2.4819, NiMo16Cr15W, Alloy C4, Alloy C276* * Illustrative, not exhaustive list    

Chemical Composition %
C%	Mn%	Fe%	P%	S%	Si%
max	max	max	max	max	max
0.05	0.80	0.70	0.030	0.010	0.75
Cu%	Ni%	Co%	Ti%	Al%
max	93.00	max	2.00	max
0.20	min	1.00	3.50	1.00

 

Mechanical Properties
Tensile Strength	≥690 MPa
Yield Strength	-
Elongation	-
Impact Strength	-

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Packaging Data
Diameter	Length	Weight
1.60 mm 2.40 mm 3.20 mm	1000 mm 1000 mm 1000 mm	5 Kg 5 Kg 5 Kg

Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.